| Customization: | Available |
|---|---|
| Color Temperature: | Cool White |
| Lamp Body Material: | Hot Rolled Steel,Q235,Q345 |
|
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The configuration of high mast light:
1. The shape usually are dodecagon or octagonal conical pole, by high strength steel plate after cutting, bending,automatic welding, the general height is 25m, 30m and 35, the maximum wind resistance design of up to 60 meters / second.
2. In the functional framework, but also to decorative materials mainly to steel, steel pipe, lamp post, lamp plate are hot dip galvanizing.
3. Electric lifting system consists of electric motor, winch, three sets of hot dip galvanized steel wire rope and cable and so on.The inside of the lamp post is mounted with a lifting speed of 3 to 5 meters per minute.
4. The guiding and unloading system is composed of guide wheel and guide arm to ensure that the lamp plate does not move transversely.during the lifting process. When the lamp plate is in place, the lamp plate can be automatically dropped and locked by the hook.
5. lighting electrical system is equipped with 6 to 24 lamps, 400 W, 1000 W, metal halide (white light), light and floodlight.The computer time controller can automatically control the switching time, part lighting or full illumination,
6. lightning protection system: the lamp top is equipped with 1.5 meters long lightning rod,
the underground foundation is equipped with 1 1 meter long grounding wires and is welded with the underground bolt.
Data Sheet:
| Light source height from the ground | 3m-30m |
|
Material |
Hot rolled steel,Q235,Q345 |
|
Length of one part |
Within 16m once forming without slip joint |
|
Thickness |
2.5mm-20mm |
|
Pole's Shape |
Can be made Single/Double arm |
| Power | 150W-400W for HPS light or 30W to 180W LED light |
| Painting color | (RAL)Color card or refer to client's requirement |
| Surface treatment | Galvanized with powder-coated |
| Quality Control | According to ISO9001-2008 and CE requirements |
Classification of high pole lamps
Generally can be divided into lifting type and non-lifting type. The height of the lifting main pole is generally more than 18m, and the electric lifting operation is convenient. After the lamp tray is raised to the working position, the tray can be automatically detached, hung in the ditch, and the wire rope can be unloaded.
The lifting type high-pole lamp is provided with two lifting control modes of manual and electric, so that the lamp tray
It can be safely and reliably lowered to 2.5 meters above the ground for easy maintenance. The length of the lead-out wire of the manual remote control device is 10m, and the operator can remotely control the lifting of the lamp panel at 5m, so as to ensure the personal safety of the operator
All The lift-type high-pole lamp is also equipped with a spare cable. When the lamp tray is lowered to a proper position, one end of the cable is inserted into the socket of the electrical control system and the other end is inserted into the junction box on the lamp tray, so that the lamp tray can be directly supplied with electricity and the lamps and lanterns can be overhauled.
The sealing grade of all lamps and lanterns of the lift-type high-pole lamp is IP65 international standard to prevent dust and rain from entering and the service life of the bulb. The materials of lamps and lanterns are generally aluminum alloy plates and stainless steel with good corrosion resistance
|
Configuration: |
|
|
1. |
The lamp post is divided into eight - edge, twelve - edge and eighteen - pyramid - shaped posts according to the diameter. The posts are made of high-strength high-quality steel plates through shearing, bending and automatic welding. Generally, the height of the posts is 20, 25, 30, 35, 40 and other specifications. The designed maximum wind resistance can reach 60m / sec. Each specification consists of 2 to 4 sections of splicing. Flanged steel chassis is provided.
|
|
2. |
The main function is frame structure, while the main decorative materials are steel pipes and steel pipes. The lamp post and plate are treated with hot dip zinc.
|
|
3. |
The electric lifting system consists of a motor, a hoist, three sets of wire ropes and cables, etc. The lamp post is installed in the body and the vertical speed is 3 to 5 meters per minute.
|
|
4. |
The guiding and unloading system consists of guiding wheels and guiding arms to ensure that the lamp tray does not move laterally during the lifting process and can automatically fall off and be locked by hooks when the lamp tray rises to the right position.
|
|
5. |
The lighting electrical system is equipped with 6 - 36 gold halogen, sodium, LED and other light source lighting and floodlights, and the computer time controller can automatically control the time of switching lights and partial lighting or full lighting.
|
|
6. |
Lightning protection system: 1.5 meter lightning rod is installed on the top of the lamp, and 1 meter long ground wire is installed on the underground foundation and welded with the underground bolt. |
){kind=link}